Wondering how to properly lubricate your garage door?
Regular maintenance-such as lubrication-can make quite a difference in keeping your garage door quiet, smooth, and reliable. Every six months, lubrication goes a long way in the reduction of noise and in preventing breakdowns. Here is a simple step-by-step guide on how to lubricate a garage door to keep it running smoothly.
Maintenance Prep Before Lubrication
Before you begin, take these few necessary steps to ensure your garage door remains in good condition:
• Hardware tightening: Keep nuts, bolts, and screws tight without over-tightening.
• Worn parts: Replace any part that appears worn.
• Check rollers: Sealed bearings will not accumulate dust, which causes them to wear out.
• Check Hinges: If hinges appear worn, sections of the door may catch as it opens.
• Tighten Garage Door Opener Chain: Make sure that a loose chain does not slap against the tracks and makes the door catch on the way up or down.
6-Step Process to lubricate a Garage Door
1. Lower the Garage Door and Switch Power off
Safety first – lower the garage door and unplug the power feeding the opener.
2. Clean the Tracks (Do Not Lubricate)
Run the vacuum to suck out dust or debris from the tracks, then wipe them clean using a wet rag. Adding lubricant in tracks can compromise the effectiveness of rollers.
3. Lubricate Hinges and Rollers
• Open the door and spray some garage door lubricant on each hinge. Give extra attention to the rollers, especially the ball bearings inside them, because they are highly involved in the smooth movement of your garage door.
4. Grease Bearing Plates and Springs
• Using a stepladder, spread lubricant over the bearing plates and springs at the top of the door. Raise and lower the door several times to distribute the grease. If any springs are broken or weakened, call a pro to replace them. This repair is hazardous.
5. Grease the Top Rail and Arm Bar
• The top rail, parallel to the ceiling, arm bar that is connected between the rail and door needs lubrication for free motions.
6. Lock Mechanism Should Be Greased
• Lastly, put lubricant on the lock mechanism of the door so that rust may not appear, and one is able to unlock or lock that door with much ease.
Once done, reconnect power to the door and test its functionality, listening for unusual noises. If the door still labors, then it may be time to seek professional help from a garage door repair company. Proper lubrication can make a huge difference in performance and the lifetime of your garage door!
To keep your garage door operating quietly and smoothly, regular maintenance like proper lubrication is essential. Following these simple steps can make a huge difference, but if you’re experiencing issues beyond lubrication, don’t hesitate to reach out.
For expert garage door repair and maintenanceIn Houston, TX and the surrounding area’s, Ranger Garage Door Repair is here to help. Contact us today for professional assistance and keep your garage door in top condition!
(832) 691-5565
https://maps.app.goo.gl/2h124eXdg2iRMDri7
